Sequence name:	20100126_saved
Version:	0000
Start date:	2010/01/26 04:00:00
End date:	2010/01/30 11:07:01
Author last name:	YAJI
Author first name:	Kentaro
Pointing file:	re-point_201001260100.txt
Events file:	op_period_201001260100.evt
Events file:	plan_term_201001260100.evt
Events file:	obev_201001260100.evt
Data rate input file:	dr_201001260100.txt
Data rate output file:	dr_XRT_201001260200.txt
Data rate simulator file:	dr_XRT_201001260200.sim
Yesterday plan date:	2010/01/25
Define FLD ROIs in sequences:	No
Sequence type:	OP Command plan
S/C slot:	-01
Last used:	2010/01/26 03:55:22
Last modified:	2010/01/25 06:49:33
AEC Table:	0000608E9278/0007
ARS Table:	0000341F5A1C/0006
FLD Table:	148D3DA8BB6C/0012
FLT Table:	000040167B23/0002
ROI Table:	000000000000/0000
Deleted:	No
Locked:	No
Unique tag:	000000000000
COT version:	2.0x24
COT build:	2020
RAMSUB ID:	291
Cmd plan pass:	200
Table load pass:	4000
Export count:	3
Starting software mode:	0
	I&T	INSTRUME: XRT		
	I&T	OBSERVER: NARUKAGE. N.		
	I&T	PLANNER: BROOKS, D,		
	I&T	ORIGIN: NAOJ		
	I&T	TOHBANS: ARIKAWA, Y.		
>	PT	: Latest re-pointing: Track 0, Format example, meaningless pointing information (OP)	2010/01/26 00:00:00	
	ESQ	End of sequence		
>	EXT	XRT_PLN_START:  (OP)	2010/01/26 04:00:00	
	ESQ	End of sequence		
>	PT	: AOCS Mem-Upload-01: AOCS Mem-Upload-01 (Memory upload :   #) (OP)	2010/01/26 09:04:22	
	ESQ	End of sequence		
>	PT	: AOCS Orb-Upload-01: AOCS Orb-Upload-01 (Orbital Information upload :) (OP)	2010/01/26 09:04:23	
	ESQ	End of sequence		
>	SEQ	TI_just_after_OP_Upload:  (OP)	2010/01/26 07:35:00	
	MSG	 (No pause)		
	MSG	************ XRT START *********** (No pause)		
	MSG	Execute, after the success of OP upload. (No pause)		
	XRT	Custom TIME_CMD : MDP_XRT_MODE_STBY AT XRT_MODE_STBY_POINT P		
	MSG	                     [   ]  [HK1_TI_CMD_NUM]     EQ    1COUNTUP (Pauses)		
	MSG	 (No pause)		
	MSG	************ XRT END *********** (No pause)		
	ESQ	End of sequence		
>	SEQ	Table_Upload_with_TI:  (OP)	2010/01/26 10:00:00	
	MSG	 (No pause)		
	MSG	************ XRT START ************ (No pause)		
	MSG	 (No pause)		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	MDP_XRT_MODE_STBY N		
	MSG	----------- Success Verify ?              OK / NG____ (Pauses)		
	MSG	 (No pause)		
	MSG	XRT Obs. Table Upload (No pause)		
	XRT	MDP_UPLOAD_XRTTBL P		
	MSG	 (No pause)		
	XRT	MDP_DUMP_XRTTBL P		
	MSG	----------- Comparison Check ?                        OK / ERR ____          (Pauses)		
	MSG	 (No pause)		
	MSG	 (No pause)		
	COM	XRTCO - CAUTION WHEN COPYING THIS TABLE.  THERE IS NO CTRL_AUTO ISSUED HERE.  Only use if no XOBs are being run before the table upload.		
	ROI			
	XRT	MDP_XRT_AEC_RESET N		
	MSG	---------- Success Verify ?            OK / NG ____ (Pauses)		
	MSG	 (No pause)		
	MSG	 (No pause)		
	MSG	All OK?   Yes--> Please Proceed. / No --> Stop here. (Pauses)		
	MSG	 (No pause)		
	XRT	MDP_XRT_MODE_OBSV P		
	XRT	Custom TIME_CMD : MDP_XRT_MODE_OBSV AT XRT_MODE_OBSV_POINT P		
	MSG	---------- Success Verify ?            OK / NG ____ (Pauses)		
	MSG	 (No pause)		
	MSG	************ XRT END *********** (No pause)		
	ESQ	End of sequence		
>	EXT	XRT_OP_START:  (OP)	2010/01/26 10:49:00	
	ESQ	End of sequence		
>	SEQ	AR_Thermal_wFLD_RESET:  (OP)	2010/01/26 10:58:54	
	I&T	OBSTITLE: AR Thermal		
	I&T	OBS_DEC: AR - Al/mesh, Ti/Poly FOV512 AEC2 Q95		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLD_RESET P		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	AB4C19807915/1769 (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (-83.4, -338.2) (OP)	2010/01/26 10:59:00	
	ESQ	End of sequence		
>	SEQ	Synoptic_Q95_2x2_Al/mesh_Ti_poly_G-band_2:  (OP)	2010/01/26 17:59:54	
	COM			
	COM	=======================		
	COM	For low rate Synoptic with Q=95.		
	COM	This is the FW1 OPEN version - used for FW1 restricted operations.		
	COM	=======================		
	COM			
	COM	Insert this SSQ 6 sec before Sun center poiting.		
	COM	This SSQ stops previous obs, moves to compromise focus, takes synoptic images, and darks.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	OBS_DEC: Synoptic Q95 2x2 - Al/mesh(45/512) + Dark cal(2x2 4x4 8x8 512 Q98) + Dark cal(1x1 512x2048 -1x1 2048x512) + Ti-poly(128/1024) + G-band(16)		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -86 N		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		:02:38_00
	XOB	7B1B23A40826/170C (Normal) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2010/01/26 18:00:00	
	ESQ	End of sequence		
>	SEQ	AR_Dynamics_wFLD_RESET:  (OP)	2010/01/26 18:09:54	
	I&T	OBSTITLE: AR Dynamics		
	I&T	OBS_DEC: AR - Ti/Poly(256msAEC3,Al-mesh(AEC3),Thick-Al(AEC3),G-band - 512x512 -2min cad		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	AB4C19807915/1769 (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (-24.2, -337.4) (OP)	2010/01/26 18:10:00	
	ESQ	End of sequence		
>	SEQ	AR_Dynamics_wFLD_RESET_HOP100:  (OP)	2010/01/26 21:19:54	
	I&T	OBSTITLE: AR Dynamics		
	I&T	OBS_DEC: AR - Ti/Poly(256msAEC3,Al-mesh(AEC3),Thick-Al(AEC3),G-band - 512x512 -2min cad		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	60015CDE255D/176C (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (1.9, -337.2) (OP)	2010/01/26 21:20:00	
	ESQ	End of sequence		
v	SEQ	AR_Dynamics_wFLD_RESET_HOP100_2:  (OP)	2010/01/27 00:29:54	
	I&T	OBSTITLE: AR Dynamics		
	I&T	OBS_DEC: AR - Ti/Poly(256msAEC3,Al-mesh(AEC3),Thick-Al(AEC3),G-band - 512x512 -2min cad		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLD_RESET P		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	60015CDE255D/176C (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (-91.9, -437.1) (OP)	2010/01/27 00:30:00	
	ESQ	End of sequence		
v	SEQ	AR_Dynamics_wFLD_RESET_HOP100_3:  (OP)	2010/01/27 01:49:54	
	I&T	OBSTITLE: AR Dynamics		
	I&T	OBS_DEC: AR - Ti/Poly(256msAEC3,Al-mesh(AEC3),Thick-Al(AEC3),G-band - 512x512 -2min cad		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLD_RESET P		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	60015CDE255D/176C (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (-170.9, -317.0) (OP)	2010/01/27 01:50:00	
	ESQ	End of sequence		
v	SEQ	AR_Dynamics_wFLD_RESET_HOP100_4:  (OP)	2010/01/27 02:29:54	
	I&T	OBSTITLE: AR Dynamics		
	I&T	OBS_DEC: AR - Ti/Poly(256msAEC3,Al-mesh(AEC3),Thick-Al(AEC3),G-band - 512x512 -2min cad		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLD_RESET P		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	60015CDE255D/176C (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (44.6, -227.0) (OP)	2010/01/27 02:30:00	
	ESQ	End of sequence		
v	SEQ	AR_Dynamics_wFLD_RESET_HOP100_5:  (OP)	2010/01/27 03:59:54	
	I&T	OBSTITLE: AR Dynamics		
	I&T	OBS_DEC: AR - Ti/Poly(256msAEC3,Al-mesh(AEC3),Thick-Al(AEC3),G-band - 512x512 -2min cad		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLD_RESET P		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	60015CDE255D/176C (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (261.9, -337.0) (OP)	2010/01/27 04:00:00	
	ESQ	End of sequence		
>	SEQ	AR_Thermal_wFLD_RESET_2:  (OP)	2010/01/27 04:59:54	
	I&T	OBSTITLE: AR Thermal		
	I&T	OBS_DEC: AR - Al/mesh, Ti/Poly FOV512 AEC2 Q95		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLD_RESET P		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	AB4C19807915/1769 (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (65.1, -337.0) (OP)	2010/01/27 05:00:00	
	ESQ	End of sequence		
>	SEQ	Synoptic_Q95_2x2_Al/mesh_Ti_poly_G-band_3:  (OP)	2010/01/27 06:06:24	
	COM			
	COM	=======================		
	COM	For low rate Synoptic with Q=95.		
	COM	This is the FW1 OPEN version - used for FW1 restricted operations.		
	COM	=======================		
	COM			
	COM	Insert this SSQ 6 sec before Sun center poiting.		
	COM	This SSQ stops previous obs, moves to compromise focus, takes synoptic images, and darks.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	OBS_DEC: Synoptic Q95 2x2 - Al/mesh(45/512) + Dark cal(2x2 4x4 8x8 512 Q98) + Dark cal(1x1 512x2048 -1x1 2048x512) + Ti-poly(128/1024) + G-band(16)		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -86 N		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		:02:38_00
	XOB	7B1B23A40826/170C (Normal) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2010/01/27 06:06:30	
	ESQ	End of sequence		
>	SEQ	AR_Thermal_woFLD_RESET_3:  (OP)	2010/01/27 06:16:24	
	I&T	OBSTITLE: AR Thermal		
	I&T	OBS_DEC: AR - Al/mesh, Ti/Poly FOV512 AEC2 Q95		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	AB4C19807915/1769 (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (75.6, -337.0) (OP)	2010/01/27 06:16:30	
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY:  (OP)	2010/01/27 14:21:00	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT:  (OP)	2010/01/27 14:26:30	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_2:  (OP)	2010/01/27 15:53:30	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_2:  (OP)	2010/01/27 16:17:00	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_3:  (OP)	2010/01/27 17:30:00	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_3:  (OP)	2010/01/27 17:53:30	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	SEQ	Synoptic_Q95_2x2_Al/mesh_Ti_poly_G-band_4:  (OP)	2010/01/27 17:55:24	
	COM			
	COM	=======================		
	COM	For low rate Synoptic with Q=95.		
	COM	This is the FW1 OPEN version - used for FW1 restricted operations.		
	COM	=======================		
	COM			
	COM	Insert this SSQ 6 sec before Sun center poiting.		
	COM	This SSQ stops previous obs, moves to compromise focus, takes synoptic images, and darks.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	OBS_DEC: Synoptic Q95 2x2 - Al/mesh(45/512) + Dark cal(2x2 4x4 8x8 512 Q98) + Dark cal(1x1 512x2048 -1x1 2048x512) + Ti-poly(128/1024) + G-band(16)		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -86 N		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		:02:38_00
	XOB	7B1B23A40826/170C (Normal) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2010/01/27 17:55:30	
	ESQ	End of sequence		
>	SEQ	AR_Thermal_woFLD_RESET_4:  (OP)	2010/01/27 18:05:24	
	I&T	OBSTITLE: AR Thermal		
	I&T	OBS_DEC: AR - Al/mesh, Ti/Poly FOV512 AEC2 Q95		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	AB4C19807915/1769 (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (172.1, -337.7) (OP)	2010/01/27 18:05:30	
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_4:  (OP)	2010/01/27 19:07:00	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_4:  (OP)	2010/01/27 19:30:30	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_5:  (OP)	2010/01/27 20:44:30	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_5:  (OP)	2010/01/27 21:08:00	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_6:  (OP)	2010/01/27 22:22:00	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_6:  (OP)	2010/01/27 22:43:30	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_7:  (OP)	2010/01/27 23:59:30	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_7:  (OP)	2010/01/28 00:09:30	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_8:  (OP)	2010/01/28 01:25:00	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_8:  (OP)	2010/01/28 01:42:00	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_9:  (OP)	2010/01/28 02:58:00	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_9:  (OP)	2010/01/28 03:19:00	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_10:  (OP)	2010/01/28 04:27:30	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_10:  (OP)	2010/01/28 04:56:30	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	SEQ	Synoptic_Q95_2x2_Al/mesh_Ti_poly_G-band_5:  (OP)	2010/01/28 05:40:24	
	COM			
	COM	=======================		
	COM	For low rate Synoptic with Q=95.		
	COM	This is the FW1 OPEN version - used for FW1 restricted operations.		
	COM	=======================		
	COM			
	COM	Insert this SSQ 6 sec before Sun center poiting.		
	COM	This SSQ stops previous obs, moves to compromise focus, takes synoptic images, and darks.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	OBS_DEC: Synoptic Q95 2x2 - Al/mesh(45/512) + Dark cal(2x2 4x4 8x8 512 Q98) + Dark cal(1x1 512x2048 -1x1 2048x512) + Ti-poly(128/1024) + G-band(16)		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -86 N		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		:02:38_00
	XOB	7B1B23A40826/170C (Normal) P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2010/01/28 05:40:30	
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (960.0, 0.0) (OP)	2010/01/28 05:50:30	
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_11:  (OP)	2010/01/28 06:08:00	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
v	SEQ	AR_Thermal_wFLD_RESET_3:  (OP)	2010/01/28 06:29:54	
	I&T	OBSTITLE: AR Thermal		
	I&T	OBS_DEC: AR - Al/mesh, Ti/Poly FOV512 AEC2 Q95		
	I&T	TARGET: AR		
	I&T	SCI_OBJ: AR, COR, FLR		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	AB4C19807915/1769 (Normal) P		
	XOB	FBBD59A3D719/175E (Flare) P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 4, Offsets (arcsec) (271.1, -339.6) (OP)	2010/01/28 06:30:00	
	ESQ	End of sequence		
v	EXT	XRT_SAA_EXIT_11:  (OP)	2010/01/28 06:34:00	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_ENTRY_12:  (OP)	2010/01/28 07:48:30	
>	SSQ	SSQ: XRT_SAA_ENTRY (7608601E9F92/0078)		
	ESQ	End of sequence		
	ESQ	End of sequence		
>	EXT	XRT_SAA_EXIT_12:  (OP)	2010/01/28 08:11:00	
>	SSQ	SSQ: XRT_SAA_EXIT (6A0B75CFEF7B/0079)		
	ESQ	End of sequence		
	ESQ	End of sequence		
v	EXT	XRT_SAA_ENTRY_13:  (OP)	2010/01/28 09:28:00	
	ESQ	End of sequence		
v	EXT	XRT_SAA_EXIT_13:  (OP)	2010/01/28 09:46:30	
	ESQ	End of sequence		
>	EXT	XRT_OPPLN_PROHIBIT:  (OP)	2010/01/28 10:20:00	
	ESQ	End of sequence		
>	EXT	XRT_OPPLN_PERMIT:  (OP)	2010/01/28 10:25:00	
	ESQ	End of sequence		
>	SEQ	STOP_OBS_WITH_FW_0-5:  (OP)	2010/01/28 10:34:54	
	I&T	OBSTITLE: Dark - Open+Thick-Be		
	I&T	OBS_DEC: Dark - Open+Thick-Be - 8x8 - 512x512 (1747)		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	XRT_FOCUS_POSITION -361 N		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		:02:36_00
	XOB	9C411FE1A907/1747 (Normal) P		
	XRT	MDP_XRT_CTRL_AUTO P		:01:00_00
	XRT	MDP_XRT_CTRL_MANU P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2010/01/28 10:35:00	
	ESQ	End of sequence		
>	EXT	XRT_OPPLN_PROHIBIT_2:  (OP)	2010/01/30 11:02:00	
	ESQ	End of sequence		
>	EXT	XRT_OP_END:  (OP)	2010/01/30 11:07:00	
	ESQ	End of sequence		
>	EXT	XRT_PLN_END:  (OP)	2010/01/30 11:07:01	
	ESQ	End of sequence		
	ESQ	End of sequence